CADD-Assisted Document Preparation State
Class
http://proethica.org/ontology/intermediate#CADD-AssistedDocumentPreparationState
Definition
State in which engineering documents are prepared using computer-aided design and drafting (CADD) systems, either by the engineer of record personally or by others working under that engineer's direction and control, creating conditions in which the signing and sealing engineer must demonstrate sufficient engagement with and oversight of the work to satisfy responsible charge requirements.
Properties
Subclass of
Action Constraints
Engineer may not seal documents prepared by others without exercising genuine direction and control
Engineer must have sufficient technical knowledge to review and verify CADD outputs
Activation Conditions
Documents are prepared for signing and sealing by a registered professional engineer
Engineer directs others who use CADD tools to prepare documents
Engineer uses CADD tools to prepare documents personally
Confidence
0.82
Obligation Activation
Duty to exercise direction and control over subordinates using CADD tools
Duty to maintain responsible charge over CADD-generated documents
Duty to verify accuracy and completeness of documents before sealing
Persistence Type
inertial
Principle Transformation
Transforms the general duty of responsible charge into specific obligations regarding oversight of technology-assisted document preparation, whether the engineer is the direct author or the supervising professional.
State Category
competence
Termination Conditions
Documents are signed and sealed and work is complete
Engineer withdraws from responsible charge of the work
Match Confidence
0.0
Matches Existing
false
Source Evidence
Text references
Engineer A, a registered professional engineer signs and seals documents he prepared using a CADD system
Engineer B, a registered professional engineer signs and seals documents which are the results of the efforts of others using a CADD system working under Engineer B's direction and control
Source text
Engineer A, a registered professional engineer signs and seals documents he prepared using a CADD system
Used in cases 1
Case ontologies that instantiate this class. Computed from each individual's type, so the list stays current as cases are extracted. The originating case is shown under Extraction details.
Case 120TTL
@prefix owl: <http://www.w3.org/2002/07/owl#> .
@prefix proeth: <http://proethica.org/ontology/intermediate#> .
@prefix proeth-prov: <http://proethica.org/provenance#> .
@prefix prov: <http://www.w3.org/ns/prov#> .
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#> .
@prefix skos: <http://www.w3.org/2004/02/skos/core#> .
@prefix xsd: <http://www.w3.org/2001/XMLSchema#> .
proeth:CADD-AssistedDocumentPreparationState a owl:Class ;
rdfs:label "CADD-Assisted Document Preparation State" ;
proeth:actionConstraints "Engineer may not seal documents prepared by others without exercising genuine direction and control",
"Engineer must have sufficient technical knowledge to review and verify CADD outputs" ;
proeth:activationConditions "Documents are prepared for signing and sealing by a registered professional engineer",
"Engineer directs others who use CADD tools to prepare documents",
"Engineer uses CADD tools to prepare documents personally" ;
proeth:confidence "0.82" ;
proeth:obligationActivation "Duty to exercise direction and control over subordinates using CADD tools",
"Duty to maintain responsible charge over CADD-generated documents",
"Duty to verify accuracy and completeness of documents before sealing" ;
proeth:persistenceType "inertial" ;
proeth:principleTransformation "Transforms the general duty of responsible charge into specific obligations regarding oversight of technology-assisted document preparation, whether the engineer is the direct author or the supervising professional." ;
proeth:stateCategory "competence" ;
proeth:terminationConditions "Documents are signed and sealed and work is complete",
"Engineer withdraws from responsible charge of the work" ;
proeth:textReferences "Engineer A, a registered professional engineer signs and seals documents he prepared using a CADD system",
"Engineer B, a registered professional engineer signs and seals documents which are the results of the efforts of others using a CADD system working under Engineer B's direction and control" ;
proeth-prov:discoveredInCase 120 ;
proeth-prov:discoveredInPass 1 ;
proeth-prov:discoveredInSection "facts" ;
proeth-prov:firstDiscoveredAt "2026-06-04T18:05:02.078098+00:00"^^xsd:dateTime ;
proeth-prov:firstDiscoveredInCase 120 ;
proeth-prov:matchConfidence 0.0 ;
proeth-prov:matchesExisting false ;
proeth-prov:sourceText "Engineer A, a registered professional engineer signs and seals documents he prepared using a CADD system" ;
rdfs:comment "State in which engineering documents are prepared using computer-aided design and drafting (CADD) systems, either by the engineer of record personally or by others working under that engineer's direction and control, creating conditions in which the signing and sealing engineer must demonstrate sufficient engagement with and oversight of the work to satisfy responsible charge requirements." ;
rdfs:subClassOf proeth:CompetenceState ;
skos:definition "State in which engineering documents are prepared using computer-aided design and drafting (CADD) systems, either by the engineer of record personally or by others working under that engineer's direction and control, creating conditions in which the signing and sealing engineer must demonstrate sufficient engagement with and oversight of the work to satisfy responsible charge requirements." ;
prov:generatedAtTime "2026-06-04T18:05:02.078098+00:00"^^xsd:dateTime ;
prov:wasAttributedTo "Case 120 Extraction",
"claude-sonnet-4-6" .
Metadata
Extraction details
Discovered in case
120
Discovered in pass
1
Discovered in section
facts
First discovered
2026-06-04T18:05:02.078098+00:00
First case
120
Generated
2026-06-04T18:05:02.078098+00:00
Attributed to
['Case 120 Extraction', 'claude-sonnet-4-6']